The FT-897D is a rugged, innovative, multiband, multimode portable transceiver for the amateur radio MF/HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m, 2 m, and 70 cm bands, the FT-897 includes operation on the SSB, CW, AM, FM, and Digital modes, and it's capable of 20-Watt portable operation using internal batteries, or up to 100 Watts when using an external 13.8-volt DC power source.The new FT-897'D' version includes coverage of the U.S. 60-meter (5 MHz) band, along with the 0.5 ppm TCXO Unit, at no additional charge!Battery-Powered Field Operation The bottom side of the FT-897 contains a “power source tray” which can accommodate up to two of the optional 13.2 Volt, 4500 mAh FNB-78 Ni-MH Battery Packs, for completely portable operation without any external power source. Maximum power output is 20 Watts (all bands) during battery operation, and with two FNB-78s you may expect up to eight hours of operating time (TX 5%, RX 5%, standby 90%). What’s more, you can charge one of the FNB-78 Battery Packs while operating the FT-897 off the other pack—ideal for situations where solar or other power sources are available.The optional CD-24 Charge Adapter provides the necessary voltage for charging, and it may be used in conjunction with an external 13.8 Volt source, or the optional PA-26 AC Adapter may be used to power the CD-24. DC 13.8V Mobile Operation Mobile operation, using the FT-897 as the cornerstone, is pure joy!
Ft-891 Reviews
The combination of the FT-897 and the ATAS-120 Auto-Tune Antenna System provides automated operation from HF through the UHF spectrum!Using an external 13.8 Volt power source, you get a full 100 Watts of power output on HF and six meters (144 MHz: 50 W, 430 MHz: 20 W). Base Station Operation The FT-897’s outstanding fundamental performance invites expansion into a full-featured base station.
- Interface Board Discontinued! The RFspace IF-2000 Revision-C interface board adds an IF output at 10.55 MHz to the Yaesu FT-2000 and FT-950 transceivers. This board allows the interfacing of the transceiver to an RFspace SDR-IQ or panoramic adapter. The addition of an SDR (software defined radio) to the Yaesu radios greatly enhances its capabilities.
- The FT-897D is a rugged, innovative, multiband, multimode portable transceiver for the amateur radio MF/HF/VHF/UHF bands. Providing coverage of the 160-10 meter bands plus the 6 m, 2 m, and 70 cm bands, the FT-897 includes operation on the SSB, CW, AM, FM, and Digital modes, and it's capable of 20-Watt portable operation using internal batteries, or up to 100 Watts when using an external 13.8.
Panoramic Adaptor Ft 891 Manual
8 PIN TO RJ-45 modular Yaesu microphone adapter FT-450D FT-897D FT-991 FT-891 - $17.99. Untitled Document 8 pin to RJ-45 modular Yaesu microphone adapter Beware clone sellers, they copy our picture & description, but those are not our cables.convert 8 pin round plug to RJ-45 plug compatible microphone: MD-200, MD-100, M-1, M-100 YM-48, MH-31, MH-31B8, MH-36D8 work with transceiver: FT-450, FT.
Panoramic Adaptor Ft 891 3
The optional FP-30 Internal Power Supply provides operation from AC sources, and the clamp-on FC-30 Automatic Antenna Tuner option expands the impedance range of the transceiver. Round out your station with the MD-200A8X Deluxe Desk Microphone and the VL-1000 Quadra System Linear Amplifier for world-class performance at home!The power source tray of the FT-897 is designed to accommodate the optional FP-30 Internal Power Supply, allowing full-power operation from 100-120 V or 200-240 V AC power sources. The quiet switching-regulator design of the FP-30 is tolerant of AC input voltage variations, making it ideal for DX-pedition use! And to extend the impedance bandwidth of your antenna system, the innovative FC-30 Automatic Antenna Tuner option clamps onto the left side of the FT-897 in seconds! Rugged, High-Output Power Amplifier Achieving 100 Watts of power output from such a compact package is a difficult mechanical and electrical engineering task.
On HF, push-pull 2SC5125 Bipolar transistors driven by push-pull 2SK2975s provide the 100-Watt power capability, while on VHF maximum efficiency during battery operation is yielded by 2SC3102 bipolar PA transistors. The rugged aluminum die-cast chassis provides a solid foundation for the heat sink for the power amplifier, with a total of almost 40 cubic inches of heat sink surface area available. With its thermostatically-controlled twin cooling fans, the FT-897 will stand up to the rigors of DX-pedition or home contest use, with dissipation capability to spare! Built-in Digital Signal Processing The FT-897 includes a wide array of analog and DSP filters to help you dig out those weak DX signals on a crowded band! One-touch activation of the DSP filters, plus a convenient “DSP” LED on the front panel, enhance the ease of using the DSP.
DSP Bandpass Filters, Noise Reduction,a nd Auto-Notch Filter circuits are included. ModelAntenna TunersFC-40Automatic Antenna Tuner (For Long Wire Antenna)AntennasATAS-120Active-Tuning Antenna SystemATAS-25The ATAS-25 is a manually-tuned portable antenna system ideal for the FT-817, FT-897, and FT-857 transceivers.